Electric Power Generation

C175-16 (50 Hz)

Producing reliable power from 2500 kVA to 3100 kVA at 50 Hz, our C175-16 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications, and match your power standards. We’ve engineered each to ISO 8528-5 transient response requirements and to accept 100 percent rated load in one step. Our C175-16 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2). Leading innovation means some models offer emissions reduced by up to 90 percent — that’s technology with benefits beyond today. Seismic certification is also available for select models, maintaining your power after unexpected disturbances. Our integrated control system, including ATS and switchgear, ensures a consistent power supply and connection to your fleet through on-site and remote monitoring options. Our EMCP 4 control panel provides expandable controller options, with management and diagnostic tools, and a user-friendly interface. We know your power needs are unique. Customize your generator sets with our broad range of accessories and bolt-on system expansion attachments. Find flexible packaging options to work with your spatial requirements and environmental conditions. We build to the highest power quality, so you can build to your power demands.

Overview

Producing reliable power from 2500 kVA to 3100 kVA at 50 Hz, our C175-16 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications, and match your power standards. We’ve engineered each to ISO 8528-5 transient response requirements and to accept 100 percent rated load in one step. Our C175-16 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2). Leading innovation means some models offer emissions reduced by up to 90 percent — that’s technology with benefits beyond today. Seismic certification is also available for select models, maintaining your power after unexpected disturbances. Our integrated control system, including ATS and switchgear, ensures a consistent power supply and connection to your fleet through on-site and remote monitoring options. Our EMCP 4 control panel provides expandable controller options, with management and diagnostic tools, and a user-friendly interface. We know your power needs are unique. Customize your generator sets with our broad range of accessories and bolt-on system expansion attachments. Find flexible packaging options to work with your spatial requirements and environmental conditions. We build to the highest power quality, so you can build to your power demands.

Generator Set Specifications

Minimum Rating2500 kVA
Maximum Rating3100 kVA
Voltage220 - 13800 Volts
Frequency50 Hz
Speed1500 RPM

Generator Set Configurations

Emissions/Fuel StrategyLow Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)

Engine Specifications

Engine ModelC175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel
Bore8.89 in
Displacement5155.88 in³
Stroke8.66 in
Compression Ratio 50 Hz16:7:1
Compression Ratio 60 Hz15:3:1
AspirationTurbo Aftercooled
Governor TypeADEM™ A4
Fuel SystemCommon Rail

Air Cleaner

  • Air Cleaner; 4 x single element canister with service indicator(s)

Control Panel

  • EMCP4 / EMCP4.2
  • Emergency stop pushbutton
  • 24-volt DC operation
  • Environmental sealed front face.
  • Text alarm/event descriptions.
  • Generator mounted - rear facing
  • Controls
  • - Speed adjust
  • - Auto/start/stop control.
  • - Engine cool-down timer.
  • - Engine cycle crank
  • - Alarm acknowledge
  • - Lamp test
  • True RMS AC metering, 3-phase, +/-2% accuracy
  • Digital Indicators
  • - RPM
  • - DC volts
  • - Operating hours
  • - Oil pressure (psi, kPa or bar)
  • - Coolant temperature
  • - Volts (L-L & L-N)
  • - Frequency (Hz)
  • - Amps (per phase & average)
  • Power Factor (per phase & average)
  • Warning/shutdown Indicators
  • - Low oil pressure
  • - High coolant temperature
  • - Overspeed
  • - Emergency stop
  • - Failure to start (overcrank)
  • - Low coolant temperature
  • - Low coolant level
  • Programmable Protective Relaying Functions
  • - Generator phase sequence
  • - Over/Under voltage
  • - Over/Under Frequency
  • - Reverse Power
  • - Reverse Reactive Power
  • - Overcurrent
  • Communications
  • - Customer data link (Modbus RTU)
  • - Accessory module data link
  • - Serial annunciator module data link
  • - 6 programmable digital inputs
  • - 4 programmable relay outputs (Form A)
  • - 2 programmable relay outputs (Form C)
  • - 2 programmable digital outputs

Cooling System

  • SCAC cooling
  • Radiator Group Shipped loose
  • Fan and belt guards
  • Coolant drain line and valves
  • Coolant Sensors

Exhaust System

  • Dry Exhaust Manifold
  • Bolted Flange, with bellow for each turbo

Fuel System

  • Primary fuel filter water / fuel water separator
  • 10 Micron Spin On Type
  • Filters x 3
  • Secondary / Tertiary fuel filters
  • - 4 Micron Spin On Type
  • - Engine mounted filters x3

Generator and Attachments

  • 3 Phase Brushless
  • Salient Pole
  • 6 lead
  • IEC Platinum Stator RTDs
  • Voltage Regulator
  • Voltage Regulator
  • - Reactive droop capability
  • - 3-Phase voltage sensing
  • - RFI suppression
  • - Min/max exciter limiter
  • - exciter diode monitor
  • Form Wound
  • Permanent Magnet
  • NEMA Class H insulation
  • Class H temperature rise at 40C ambient
  • (LV) Busbar connections, top/center mounted, top cable entry
  • - 50 Hz models: IEC standard hole pattern
  • (MV) Busbar connections, right side extension box, bottom cable entry
  • Anti Condensation Space Heater
  • Class F temperature rise at 40C ambient
  • Right side extension box, bottom cable entry

Governing System

  • ADEM A4
  • Redundant Shutdown (Overspeed protection through a duplicate speed sensing system)

Lube System

  • Lubricating oil
  • Gear type lube oil pump
  • Integral lube oil cooler
  • Oil filter, filler and dipstick
  • Oil drain lines and valve
  • Fumes disposal
  • Prelube - required with prime, continuous, and standby

Mounting Systems

  • Rails - Engine/Generator
  • Rubber anti-vibration mounts (shipped loose)
  • Dual 24-volt electric starting motors
  • Batteries and battery rack w/cables
  • Battery disconnect switch

Service Instructions

  • Two PM inspections

Power Termination

  • Bus Bar

General

  • Paint - Caterpillar Yellow with high gloss black rails & radiator
  • Right hand service
  • Flywheel and flywheel housing-SAE No. 00
  • SAE standard rotation

Back to this category

Back
to top